Simulation and experiment of the cooling effect of trapped ion by pulsed laser

We investigate the process of pulsed laser cooling using a self-constructed molecular dynamics simulation(MDSimulation) program. We simulate the Doppler cooling process and pulsed laser Doppler cooling process of a single ~(40)Ca~+ ion, and the comparison with the experimental results shows that this self-constructed MD-Simulation program works well in the weak laser intensity situation. Furthermore, we analyze the pulsed laser Doppler cooling process of a single ~(27)Al~+ ion. This program can be used to analyze the molecular dynamic process of various situations of Doppler cooling in an ion trap, which could give predictions and experimental guidance.     

Pulsed laser deposition of pure fluoroapatite film without OH groups

The relation between O₂ pressure and composition in the pulsed‐laser deposition of fluoroapatite was investigated using both on‐axis and off‐axis methods to determine the optimal conditions for obtaining a pure fluoroapatite film without OH groups. Through this, it was found that an O₂ pressure of 10 Pa, combined with an off‐axis method, results in P/Ca and F/Ca values (0.6 and 0.2, respectively) that match closely with a stoichiometric composition of Ca₁₀(PO₄)₆F₂. Fourier transform infrared spectroscopy analysis confirmed that this optimized film was almost pure fluoroapatite, with no evidence of any OH groups originating from hydroxyapatite. X‐ray diffraction also revealed that this fluoroapatite film crystallizes with a c‐axis orientation perpendicular to its surface.     

Oxidative dehydrogenation of propane under steady-state and transient regimes over alumina-supported catalysts prepared from mixed V_2W_4O_（19）~（4-） hexametalate precursors

An integrated approach combining the development of an innovative catalyst and the research of a set of adequate operating conditions for the propane oxidative dehydrogenation (ODH) is described. The experimental set-up, specially designed for steady-state and transient studies is presented. The preparation method, the characterization and the performances in steady-state and transient regimes of catalysts based on V_2W_4O_(19)~(4-) Lindqvist isopolyanion used as a precursor and supported on alumina are reported. The influence of the preparation method of the catalyst and the role of water in the feed gas are more particularly discussed.     

Monitoring of metabolic profiling and water status of Hayward kiwifruits by nuclear magnetic resonance

The metabolic profiling of kiwifruit (Actinidia deliciosa, Hayward cultivar) aqueous extracts and the water status of entire kiwifruits were monitored over the season (June-December) using nuclear magnetic resonance (NMR) methodologies. The metabolic profiling of aqueous kiwifruit extracts was investigated by means of high field NMR spectroscopy. A large number of water-soluble metabolites were assigned by means of 1D and 2D NMR experiments. The change in the metabolic profiles monitored over the season allowed the kiwifruit development to be investigated. Specific temporal trends of aminoacids, sugars, organic acids and other metabolites were observed.The water status of kiwifruits was monitored directly on the intact fruit measuring the T₂ spin-spin relaxation time by means of a portable unilateral NMR instrument, fully non-invasive. Again, clear trends of the relaxation time were observed during the monitoring period.The results show that the monitoring of the metabolic profiling and the monitoring of the water status are two complementary means suitable to have a complete view of the investigated fruit.     

Formation of artificial micro‐pits on Al alloy with the photon rupture method and the localized corrosion behavior of the formed pits

An in situ artificial micro‐pit fabrication method with an area selective electrochemical measurement technique was applied to investigate the effect of the geometry of artificially formed pits on their localized corrosion behavior in anodized 1000 series aluminum. This technique enables the fabrication of artificial micro‐pits with different aspect ratios (pit depth/pit diameter) in solutions. The aspect ratios of the fabricated artificial micro‐pits in this experiment could be varied from 0.13 to 1.83 by controlling the irradiation time of the focused pulsed YAG laser beam. By applying a constant potential to the final laser‐beam‐irradiated spot in chloride environments, localized dissolution occurred only at the laser beam irradiated area, because the anodic oxide film acted as an insulator. The corrosion current and charge increase with increasing aspect ratio at any applied potential. Copyright © 2010 John Wiley & Sons, Ltd.     

脉冲激光法制备修饰纳米Eu_2O_3/聚苯胺导电杂化薄膜

采用聚焦脉冲激光法(PLA-IT/SFL)制备修饰纳米Eu2O3/聚苯胺有机溶胶及其杂化薄膜材料。考察了制备条件对修饰纳米Eu2O3/聚苯胺有机溶胶荧光性能的影响。TEM显示Eu2O3粒子粒径约为15 nm且其在聚苯胺中有较高的稳定性。荧光光谱表明该杂化薄膜材料在紫外光照射下发出强烈的红光,且荧光强度达2.53×105a.u。杂化薄膜材料的电导率为1.13×10-2S.cm-1。热分析表明该杂化薄膜比导电性聚苯胺(PAN-HCSA)薄膜具有更好的热稳定性。该杂化薄膜材料可望用于电致发光领域。     

Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

For the last decade, a variant of pulsed laser ablation, Resonant-Infrared Matrix-Assisted Pulsed Laser Evaporation (RIR-MAPLE), has been studied as a deposition technique for organic and polymeric materials. RIR-MAPLE minimizes photochemical damage from direct interaction with the intense laser beam by encapsulating the polymer in a high infrared-absorption solvent matrix. This review critically examines the thermally-induced ablation mechanisms resulting from irradiation of cryogenic solvent matrices by a tunable free electron laser (FEL). A semi-empirical model is used to calculate temperatures as a function of time in the focal volume and determine heating rates for different resonant modes in two model solvents, based on the thermodynamics and kinetics of the phase transitions induced in the solvent matrices. Three principal ablation mechanisms are discussed, namely normal vaporization at the surface, normal boiling, and phase explosion. Normal vaporization is a highly inefficient polymer deposition mechanism as it relies on collective collisions with evaporating solvent molecules. Diffusion length calculations for heterogeneously nucleated vapor bubbles show that normal boiling is kinetically limited. During high-power pulsed-FEL irradiation, phase explosion is shown to be the most significant contribution to polymer deposition in RIR-MAPLE. Phase explosion occurs when the target is rapidly heated (10⁸ to 10¹⁰ K/s) and the solvent matrix approaches its critical temperature. Spontaneous density stratification (spinodal decay) within the condensed metastable phase leads to rapid homogeneous nucleation of vapor bubbles. As these vapor bubbles interconnect, large pressures build up within the condensed phase, leading to target explosions and recoil-induced ejections of polymer to a near substrate. Phase explosion is a temperature (fluence) threshold-limited process, while surface evaporation can occur even at very low fluences.     

强流脉冲电子束作用下20钢的微观结构状态

 为了研究金属材料的超快变形行为,利用强流脉冲电子束（HCPEB）装置对20钢进行轰击,采用X射线衍射、光学显微镜及透射电镜等技术分析了受轰击样品的变形组织与结构。实验结果表明,强流脉冲电子束能够在材料表层诱发幅值为1 GPa量级的应力,快速的加热和冷却过程在近表层诱发了强烈的塑性变形,并在材料表层内形成了复杂的位错缠结结构和位错胞结构,同时还伴随位错圈等空位簇缺陷的形成,多次轰击导致局部区域形成纳米和非晶结构。HCPBE轰击诱发的幅值极大的应力和极高的应变速率而导致的整个原子平面的位移可能是非晶结构形成的关键原因。     

基于卷绕型带状线的感应电压叠加器的初步实验

 提出了一种基于卷绕型带状线和感应电压叠加器的重复频率脉冲电子束加速器的技术方案。介绍了一台感应电压叠加器感应单元的结构设计,并建立相应的电路模型,对其响应特性进行了模拟研究。介绍了卷绕型带状线的设计原理,制作了一台输出阻抗约3 Ω、脉冲宽度约230 ns的固态化卷绕型带状脉冲形成线。利用该脉冲发生器作为馈源,对感应电压叠加器感应单元的响应特性进行了实验研究,表明感应单元响应良好。对4级感应电压叠加器分别进行了单次脉冲和5 Hz重复频率的实验研究,结果表明叠加器的输出电压约为输入电压幅值的4倍,电流效率约80%,重复频率条件下,脉冲序列重复性较好。     

引信用激光与加速度传感器复合定高技术

比较了不同类型的弹载定高体制,提出了脉冲激光与重力加速度传感器复合定高的定距原理,并对测距误差进行深入分析,得出其定高精度。对设计出的原理样机进行了实验测试,平台倾斜角度检测实验的结果表明,静态条件下最大角度误差小于0.3;0~500 m定高测试实验的结果表明,测量平均值与实际值最大误差为2.5 m,并且与目标距离无关。